Temperature controller Simplified model without power supply
Low cost temperature control system specifically designed for BOXCOOL
Features
| Environment of use | Function | |
| Indoor | Display | Wide range of supply voltages |
Certificates/Approvals
| EU RoHS2 | China RoHS | CE | UL | CSA | PSE |
Model/Specifications
| Model | OCE-TC91-8Y1-1C | OCE-TC91-8P3-1C | |
| Control method | Auto-tuning PID controller ON/OFF control | ||
| Setting range | -100 to +80℃ | ||
| Control output | Contact output 240VAC 2.0A/Resistance load 240VAC 1.2A/Induction load |
Voltage output 11V±1VDC (at load resistance1.5kΩ) Load current not exceeding 30mA |
|
| Type of input (option) *1 | ・Thermocouple (B, R, S, K, E, J, T, N, PLⅡ, Wre5-26,{U,L（DIN43710）}) ・Resistance temperature detector (JIS Pt100/JPt100 3-wire type) 0.25mA ・Rated voltage (-10 - 10, 0 - 10, 0 - 20, 0 - 50, 10 - 50, 0 - 100 mVDC)･･･ Input scaling possible |
||
| Power supply voltage (50/60Hz) | 100-240V AC±10% | ||
| Power consumption | Approx. 11VA | ||
| Digital display | Measured value (PV)/７segment Red LED 4 digit Target set variable (SV)/７segment Green LED 4 digit | ||
| Display accuracy *2 | ±(0.3％FS＋1 digit) | ||
| Display resolution | Varies by measurement range (0.1, 1) | ||
| Sampling frequency | 0.25 sec. | ||
| Liquid temperature | Number of alarm point | 2 points of EV1 and EV2 (Normally open, Common) | |
| Alarm items | Select from upper deviation limit, lower deviation limit, out of deviation range, within deviation range, upper absolute value limit, lower absolute value limit | ||
| Action | ON-OFF action | ||
| Rating | Contact 1a×2 (Common)/240VAC 1A (Resistance load) | ||
| Data storage | Non-volatile memory (EEPROM) | ||
| Working temperature | -10 to +50℃ | ||
| Working humiidity | Max. 90%RH, free from condensation | ||
| Insulation resistance | Between input/output terminals and power terminal/ Min. 500VDC, 20MΩ Between input/output teminals and protection condutor terminal/500VDC, 20MΩ |
||
| Withstand voltage | Between input/output terminals and power terminal, 2300 VAC, 1 minute Between power terminal and protection conductor terminal, 1500VAC, 1 minute |
||
| Protective structure | IP66 equivalent dust and splash proof constuction (Front panel part only) | ||
| Casing material | PPO plastic molding (UL94V-1 equivalent) | ||
| Installation | Recessed mounting with single action | ||
| Panel thickness | 1.0-4.0mm | ||
| Mounting hole dimensions | W45×H45 | ||
| Terminal screw | M3.5 | ||
| Conformity to standards | Environment | RoHS2 | |
| Dimensions (mm) | H48×W48×D111 | ||
| Weight | 170g | ||
*1 Sensors for thermocouple and RTD are sold separately.
*2 Excluding cold junction temperature compensation accuracy of thermocouple input
*2 Excluding cold junction temperature compensation accuracy of thermocouple input
OCE-TC91-8Y1/8P3-1C
Dimensional drawing
Example of use
OCE-TC91-8Y1-1C Contact output type
Example of using a switched-mode power supply having remote control function for contact input
OCE-TC91-8P3-1C Power supply output type
Example of using a switched-mode power supply having remote control function for voltage input
Cautions
・Do not use this product in a place where flammable or corrosive gasses, oil fume or any matters that can destroy insulation generate or permeate.
・The site of use should be free from vibration and impact.
・Electrical works required for installation of this product should be done only by professionals or qualified personnel.
・Indoor use only.
・Inversion control function is not provided. Single output control for either heating or cooling (factory setting : cooling control)
・Make sure that the packaging is not damaged on delivery. Any packaging damage can lead to breakdown of the product. Please contact us immediately if any damage is found.
・The site of use should be free from vibration and impact.
・Electrical works required for installation of this product should be done only by professionals or qualified personnel.
・Indoor use only.
・Inversion control function is not provided. Single output control for either heating or cooling (factory setting : cooling control)
・Make sure that the packaging is not damaged on delivery. Any packaging damage can lead to breakdown of the product. Please contact us immediately if any damage is found.
