CE-marked Internal mounting
Internal mounting type with CE marking
| Environment of use | Type of mounting | Cooling method |
| Indoor | Internal lateral mounting | Air cooling |
Certificates/Approvals
| EU RoHS2 | China RoHS | CE | UL | CSA | PSE |
Quick Selection
Model/Specifications
| Model | OC-12-A200-CE | OC-28-A200-CE | OC-37-A200-CE | |
| Type of mounting | Internal lateral mounting | |||
| Cooling capacity *1 | 10/12W/K | 16/20W/K | 35/42W/K | |
| Rated voltage*2 | Single phase 200 to 230VAC | |||
| Rated current consumption *3 | 0.20-0.24A/0.18-0.21A | 0.40-0.48A/0.36-0.42A | 1.12-1.41A/1.14-1.21A | |
| Rated power consumption *3 | 44/42W | 88/84W | 200/180W | |
| Working temperature | -10 to +70℃, ice-free | |||
| Working humidity | 20 to 85%RH, free from condensation | |||
| Noise | 58dB(A) | 62dB(A) | 68dB(A) | |
| Conformity to standards |
EMC Directive | EN55011、EN61000-3-2、EN61000-3-3、EN61000-6-2 | ||
| Low Voltage Directive | EN60204-1 | |||
| Environment | RoHS2 | |||
| Dimensions (mm)*4 | W200×H480×D66 | W280×H590×D90 | W382×H650×D90 | |
| Weight | 5.8kg | 10.7kg | 16.1kg | |
*1 Nominal value when the temperature difference between inside and outside the control panel is 20K
*2 This product is designed for single phase 200 to 230VAC range.
*3 Values based on our measurement under the temperature and humidity conditions of +25℃ and 50%RH
*4 Excluding the terminal block and the filter guard
*2 This product is designed for single phase 200 to 230VAC range.
*3 Values based on our measurement under the temperature and humidity conditions of +25℃ and 50%RH
*4 Excluding the terminal block and the filter guard
Contents of page
OC-12-A200-CE
Cooling capacity
10/12 W/K（50/60Hz）
A complete set of supply
BOXFAN : 1 unit Filter guard 120 sq. : 1 pc. Fin guard : 1 pc. Guide : 2 pcs.
Filter : 1 pc. Screws for filter/fin guards : 6 pcs. Retaining washer : 6 pcs.
Warning label (Rotating parts) : 1 pc. Instruction manual : 1 copy
Filter retainer : 1 pc. Screw for filter retainer : 1 pc.
Filter : 1 pc. Screws for filter/fin guards : 6 pcs. Retaining washer : 6 pcs.
Warning label (Rotating parts) : 1 pc. Instruction manual : 1 copy
Filter retainer : 1 pc. Screw for filter retainer : 1 pc.
Maintenance parts
| Filter guard | Fin guard | Replacement filter | Replacement fan | ||||
| FFG-120 | 1pc/set | OG-12 FIN | 1 set | OF-S1 | 1 pc. | FM-11938M -MV-00 |
1 pc. |
Dimensional drawing
Mounting cutout
Cooling capacity
16/20 W/K（50/60Hz）
A complete set of supply
BOXFAN : 1 unit Filter guard 120 sq. : 1 pc. Fin guard : 1 pc. Guide : 2 pcs.
Filter : 2 pcs. Screws for filter/fin guards : 10 pcs. Retaining washer : 10 pcs.
Warning label (Rotating parts) : 1 pc. Instruction manual : 1 copy
Filter retainer : 2 pcs. Screw for filter retainer : 2 pcs.
Filter : 2 pcs. Screws for filter/fin guards : 10 pcs. Retaining washer : 10 pcs.
Warning label (Rotating parts) : 1 pc. Instruction manual : 1 copy
Filter retainer : 2 pcs. Screw for filter retainer : 2 pcs.
Maintenance parts
| Filter guard | Fin guard | Replacement filter | Replacement fan | ||||
| FFG-120 | 1ps/set | OG-28 FIN | 1 set | OF-S1 | 1 pc. | FM-11938M -MV-00 |
1 pc. |
Dimensional drawing
Mounting cutout
Cooling capacity
35/42 W/K（50/60Hz）
A complete set of supply
BOXFAN : 1 unit Filter guard 150 sq. : 2 pcs. Fin guard : 1 pc. Guide : 2 pcs.
Filter : 2 pcs. Screws for filter/fin guards : 10 pcs. Retaining washer : 10 pcs.
Warning label (Rotating parts) : 1 pc. Instruction manual : 1 copy
Filter retainer : 2 pcs. Screw for filter retainer : 2 pcs.
Filter : 2 pcs. Screws for filter/fin guards : 10 pcs. Retaining washer : 10 pcs.
Warning label (Rotating parts) : 1 pc. Instruction manual : 1 copy
Filter retainer : 2 pcs. Screw for filter retainer : 2 pcs.
Maintenance parts
| Filter guard | Fin guard | Replacement filter | Replacement fan | ||||
| FFG-150 | 1pc/set | OG-37 FIN | 1 set | OF-S2 | 1 pc. | FM-15055M -MV-00 |
1 pc. |
Dimensional drawing
Mounting cutout
Related products
Thermostat
Contributes to energy saving, thus a good solution to ISO14000
Cautions
・Locate BOXFAN at least 150 mm away from adjacent components or walls to keep smooth air circulation between inside and outside the enclosure. Failure to this will lead to performance decline.
・Electrical connection should be made via an appropriate circuit breaker.
・This product is for indoor use only.
・Do not use this product in a place where flammable or corrosive gasses or any matters that can destroy insulation generate or permeate.
・The site of use should be free from vibration and impact.
・Electrical works required for installation of this product should be done only by professionals or qualified personnel.
・Make sure that the packaging is not damaged on delivery. Any packaging damage can lead to breakdown of the product. Please contact us immediately if any damage is found.
・Electrical connection should be made via an appropriate circuit breaker.
・This product is for indoor use only.
・Do not use this product in a place where flammable or corrosive gasses or any matters that can destroy insulation generate or permeate.
・The site of use should be free from vibration and impact.
・Electrical works required for installation of this product should be done only by professionals or qualified personnel.
・Make sure that the packaging is not damaged on delivery. Any packaging damage can lead to breakdown of the product. Please contact us immediately if any damage is found.
