Option　Non-drain unit for OCA-E

Atomizes condensate water by ultrasonic vibration. Eliminates troublesome drain management.

Model/Specification

Model		OCA-ME-080
Processing method		Ultrasonic atomization
Applicable products		OCA-E300BC-AW, OCA-E600BC-AW OCA-E1000BC-AW, OCA-E1600BC-AW
Conditions for drain-free		＋35℃ , not exceeding 85%RH
Rated voltage ^*1		Single phase, 100—240VAC, 50/60Hz
Max. current consumption	100V	0.8A
	200V	0.5A
	240V	0.4A
Standby power consumption		3W
Operating power consumption		75W
Working temperature ^*2		+20℃ to +55℃
Working humidity		Max. 85%RH, free from condensation
Noise		52 dB (A)
Display		Power lamp (Green)/Alarm lamp (Red)
Function		Float switch-operated ON/OFF at threshold amount, Overflow detection
Conformity	Environment	RoHS2
Color		N8 corresponding, N4 corresponding
Dimensions (mm)		W300×H260×D200
Weight		6.5kg

*1 According to the voltage supplied from the COOLCABI attached to.
　 The permissible voltage variation during operation is within +10% to -10% to the rated value, which means instantaneous variation and does not mean a supply voltage constantly input.
*2 Use only within the specified temperature range.

OCA-ME080

A complete set of supply

OCA-ME080：1 pc.　●Fixing screw (M4)：4 pcs.　●Washer：4 pcs.　
●Mounting stay：2 pcs. 　●Mounting spacer (M4)：1 pc　
●Connecting hose：40 mm　●Instruction manual：1 copy

Consumable parts

Replacement filter

EPF-S3

Dimensional drawing

Installation drawing

For OCA-E300BC-AW

画像説明文

For OCA-E600BC-AW

For OCA-E1000BC-AW

For OCA-E1600BC-AW

Cautions

This product is designed to process drainage water from enclosure coolers. Do not use it for any other purposes than original intention.
Locate the unit so as to assure good ventilation and distance of at least 500mm from the walls or other units.
Failure to this may degrade performance of the unit and cause condensation.
This product is for indoor use only.
Do not use this product in a place where corrosive or flammable gasses exist in the air, or where insulation breakdown can occur.
Do not use this product in a place where it is subject to shock or vibration.
Make sure that electrical wiring work is done by qualified electrician.
Check for damage on packaging when the product is delivered. Any packaging damage can lead to a cause of malfunction.
Make sure that there is no damage on the package on delivery and contact your supplier, if any.