Ultrasonic atomization type
Atomizes drain water by means of ultrasonic vibrator
Features
| Environment of use | Type of mounting | Processing method | Specifications |
| Indoor | Lateral, Recessed or Stationary | Ultrasonic atomization | Wide range of supply voltages |
Certificates/Approvals
| EU RoHS2 | China RoHS | CE | UL | CSA | PSE |
Model/Specifications
| Model | OCJ-M030-AW | OCJ-M060-AW | |
| Processing method | Ultrasonic atomization | ||
| Type of mounting | Lateral, Recessed or Stationary mounting | ||
| Processing capacity *1 | 320ml/h | 650ml/h | |
| Rated voltage | Single phase, 100-240VAC | ||
| Stand-by time power consumption *2 | 5W | ||
| Operating time power consumption *2 | 44W | 82W | |
| Working temperature | +10 to ＋50℃ | ||
| Working humidity | Max. 85％, free from condensation | ||
| Atomization operation | Float switch-opearted ON/OFF at threshold amount | ||
| Protective function | Overflow detection | ||
| Error output | 1 contact output for overflow No voltage a contact 250VAC 3A Resistance load | ||
| Noise | 52dB(A) | ||
| Secondary drain pipe *3 | Ø13 | ||
| Conformity to standards | Environment | RoHS2 | |
| Dimensions (mm)*4 | W300×H190×D150 | W350×H200×D200 | |
| Weight *5 | 4.8kg | 6.5kg | |
*1 Drainage processing capability at 30℃ambient temp. and 60％RH
*2 Maximum value within the working temp. range
*3 This port is plugged when shipped.
*4 Excluding projections
*5 Dry weight
*2 Maximum value within the working temp. range
*3 This port is plugged when shipped.
*4 Excluding projections
*5 Dry weight
- Supply voltage should be within the specified range with fluctuation not exceeding ±10%.
Contents of page
OCJ-M030-AW
Processing capacity
320ml/h
A complete set of supply
EVAPRO : 1 unit Packing : 1 pc. Fixing bolt : 4 pcs. Washer : 4 pcs.
Spring washer : 4 pcs. Nut : 4 pcs. Instruction manual : 1 copy
Spring washer : 4 pcs. Nut : 4 pcs. Instruction manual : 1 copy
Maintenance parts
| Filter | |
| EPF-S3 | 1 pc. |
Performance chart
Dimensional drawing
Mounting cutout
OCJ-M060-AW
Processing capacity
650ml/h
A complete set of supply
EVAPRO : 1 unit Packing : 1 pc. Fixing bolt : 4 pcs. Washer : 4 pcs.
Spring washer : 4 pcs. Nut : 4 pcs. Instruction manual : 1 copy
Spring washer : 4 pcs. Nut : 4 pcs. Instruction manual : 1 copy
Maintenance parts
| Filter | |
| EPF-S3 | 1 pc. |
Performance chart
Dimensional drawing
Mounting cutout
Option
Stationary mount bracket
・For OCJ-M030-AW : OCJ-AN1
・Doe OCJ-M060-AW : OCJ-AN2
Mounting plate : 2 pcs.
Fixing screw : 4 pcs.
・Doe OCJ-M060-AW : OCJ-AN2
Mounting plate : 2 pcs.
Fixing screw : 4 pcs.
Supplementary drain receiver
・For OCJ-M030-AW : OCJ-WPU1
・For OCJ-M060-AW : OCJ-WPU2
EVAPRO : 1 unit Tank : 1 pc.
Fixing screw : 4 pcs.
・For OCJ-M060-AW : OCJ-WPU2
EVAPRO : 1 unit Tank : 1 pc.
Fixing screw : 4 pcs.
Cautions
・This product is designed for processing drain water discharged from enclosure coolers. Do not use it for any other purposes.
・Locate EVAPRO at least 200 mm away from adjacent components or walls to keep smooth air circulation. Failure to this will lead to performance decline or adverse effect on other components.
・Do not use this product in a place where oil fumes, flammable/corrosive gasses or any matters that can destroy insulation generate or permeate.
・The site of use should be free from vibration and impact.
・Electrical works required for installation of this product should be done only by professionals or qualified personnel.
・Do not disassemble or tamper.
・Make sure that the packaging is not damaged on delivery. Any packaging damage can lead to breakdown of the product. Please contact us immediately if any damage is found.
・Locate EVAPRO at least 200 mm away from adjacent components or walls to keep smooth air circulation. Failure to this will lead to performance decline or adverse effect on other components.
・Do not use this product in a place where oil fumes, flammable/corrosive gasses or any matters that can destroy insulation generate or permeate.
・The site of use should be free from vibration and impact.
・Electrical works required for installation of this product should be done only by professionals or qualified personnel.
・Do not disassemble or tamper.
・Make sure that the packaging is not damaged on delivery. Any packaging damage can lead to breakdown of the product. Please contact us immediately if any damage is found.
