JB-W series Female threaded, Spring terminal block integrated
A spring-clamp terminal block with female threaded entries. Allow a wide variety of connector selection for your particular requirement.
Features
Protection category | Color | Rated voltage | Rated current | Oilproof | Weatherproof | Number of terminals |
IP67 | Black/Light gray/Beige | 600V | 20A | ✓ | ✓ | 6P |
Certificates/Approvals
EU RoHS2 | China RoHS | CE | UL | CSA | PSE |
Model/Specification
Oilproof/Weatherproof
Model | Rated voltage | Number of terminals | Weight (*1) |
Q'ty per package | ||
Black | Light gray | Beige | ||||
JB-WR226 | JB-WR226C1 | JB-WR226BJ | AC/DC 600V 20A |
6P Model:ST 2.5 by Phoenix Contact |
173g | 1 pc. |
Common:Working temperature -25 to+80℃
*1 Weight values are for Black color.
*1 Weight values are for Black color.
Clamp or Connector selection parameter
Item | Parameter |
Connector diameter | Ø42mm or less |
Thread | CTG22 |
Instructions
【Terminal board】
JB-WR226 is equipped with a terminal board type ST2.5 by Phoenix ContactJB-WR226
The square hole is for a screw driver and the circular hole is for a cable. Insert a driver into the square hole to open the spring. Then insert a cable with 10 mm stripped end into the circular hole and release the screw driver. Connection process completes by these two steps.For the precise information, please consult with the terminal board manufacturer for the details.
Cable entry port
Attach an appropriate cable gland or a connector at the port in accordance with the manufacturer’s instruction.
【Cautions】Use the cable gland or the connector properly as instructed in order to assure its intended liquid tightness.
Attach an appropriate cable gland or a connector at the port in accordance with the manufacturer’s instruction.
【Cautions】Use the cable gland or the connector properly as instructed in order to assure its intended liquid tightness.
Option
Cautions
*Do not step foot or put load on the product. Do not paint the product.
*Do not use this product in oil or water.
*To prevent deterioration, avoid using or storing this product under the following atmospheres.
*Do not use this product in oil or water.
*To prevent deterioration, avoid using or storing this product under the following atmospheres.
- Outside the range of working temperature
- Water vapor contained or high temperature/humidity air
- Acidic, alkaline or organic solvent-containing air (See Technical Data "Chemical resistance")
- For Oilproof Type (Rubber color : black)
Do not expose to direct and continuous sunlight.
Suitable for oily environments
*For non-oily places, use Weatherproof type. - For Weatherproof Type (Rubber color : blue)
Avoid using in oily environments.
For non-oily indoor places, Weatherproof type is recommended.
Wiring precautions
Please pay attention to the following matters in wiring work.
*Avoid direct sunshine in outdoor use.
*To prevent entry of water dropping along the cable, pay attention to the following matters.
*Avoid direct sunshine in outdoor use.
*To prevent entry of water dropping along the cable, pay attention to the following matters.
- Do not place the JOIBOX so as the cable entry is in an upward direction.
- When the cable is drawn from higher position, provide a water trap or a horizontal portion.