Mounting base RESLOCK type OL-F
Provides clearance height for cable and tube installations
Certificates/Approvals
EU RoHS2 | China RoHS | CE | UL | CSA | PSE |
・Applications Ideal where frequent cleaning and rinsing is required such as food processing or cutting machines, or where direct cable/tube attachment is not allowed
Contents of page
Model/Specifications
Model | Cable tie width | fixing screw | Color | Working temperature | Weight | Q'ty per package |
OL-F4-30 | 8.7mm or less | M4×25 (cross-recessed pan head screw) |
Black | -25 to +80℃ | 5g | 50 pcs. |
OL-F4-50 | 12.6mm or less | M4×35 (cross-recessed pan head screw) |
10g |
Instructions
1. Set RESLOCK. (No matter the direction of top and bottom)
(By screw)
Simply tighten a screw through the RESLOCK to the mounting surface.
(By cable tie)
Place RESLOCK and secure it with a cable tie to the desired mounting location.
2.Install Components to RESLOCK Block.
Place cables or tubes on the depressed part of RESLOCK and loop a cable tie around.
Pull the cable tie to secure the components.
Cautions
・Do not step foot or put load on the product. Do not paint the product.
・To prevent deterioration, avoid using or storing this product under the following atmospheres.
・To prevent deterioration, avoid using or storing this product under the following atmospheres.
- Outside the range of working humidity and temperature
- Water vapor contained or high temperature/humidity air
- Acidic, alkaline or organic solvent-containing air (See Technical Data "Chemical resistance")